What are the causes of DC drive burn? How to avoid it?

The causes of DC drive burnout may include the following:

1. Overload: overload operation may cause the system to fail to work normally, increase the load of DC drive, and cause the DC drive to fail to work normally and burn out.

2. Unstable power supply voltage: If the power supply voltage to the DC drive is unstable, too high or too low voltage may cause the DC drive to burn out.

3. Internal failure: The internal components of the DC drive may burn out due to service life, manufacturing defects or other failures.

4. External failure: in some cases, the short circuit of the motor, the short circuit of the cable line, etc., may also cause the DC drive to burn out.

5. Wrong operation: For people who are not familiar with the DC drive, wrong operation may also cause the DC drive to burn out.

Of course, the above are just some possible reasons, specific reasons need to be analyzed according to the specific situation.

The following are several ways to avoid burning out the DC drive:

1. Reasonable matching: When installing DC drive, appropriate matching DC drive should be selected according to the actual demand to ensure the normal operation of the motor system.

2. Ensure power supply stability: Before using the DC drive, the input power supply voltage should be checked to ensure its stability, and ensure that the power supply voltage is in line with the rated voltage range of the DC drive.

3. Prevent internal failure: to prevent the failure of the internal components of the DC drive, you can carry out regular maintenance and inspection of the DC drive to ensure its normal operation. In addition, do not disassemble or change the DC drive structure and parameter Settings.

4. Prevent external faults: in the use of DC drive, it is necessary to protect the motor and cable line to prevent failures caused by these factors.

5. Correct operation: For the personnel operating DC drive, training and guidance are required to ensure that they understand the correct operation method to avoid the failure caused by human causes.

To sum up, through the above measures, you can effectively avoid DC drive burn out.